記事一覧

Oil air separator separator/oil trap for Mercedes Benz 6110160234

Description
Compressed air oil separator, is actually a compressed air with gas-liquid separator, it is not oil and water separation, is used to separate the condensed air in the condensation of water and oil impurities, so that the initial purification of compressed air. Separated oil and water from the sewage outfall together. The general use of pressure is not restricted, the use of temperature should be at room temperature. QF gas-liquid separator works: When the compressed air into the water separator after the flow direction and the rapid changes in speed, and then rely on centrifugal action, the density of oil droplets and water droplets larger than the compressed air separation. As shown in the figure for the common impact and ring rotary oil-water separator. Compressed air from the inlet into the separator shell, the air first by the barrier blocking the impact of folding back down, then rise back up, resulting in circular rotation. So that the water droplets and oil droplets in the centrifugal force and inertial force, separated from the air precipitation and settlement in the bottom of the shell, regularly open the bottom of the valve to drain oil droplets. The purified air is sent from the outlet to the tank.

Part Name: Oil separator,Crankcase breather oil trap
OEM: 6110160234

Application
BENZ: VITO W638

留言

No title

Greetings! Very useful advice in this particular article!

It is the little changes that produce the largest changes.
Thanks a lot for sharing!

等待许可的留言

此留言需要管理员的许可

等待许可的留言

此留言需要管理员的许可

等待许可的留言

此留言需要管理员的许可

等待许可的留言

此留言需要管理员的许可

发表留言

秘密留言